End Of The Session; Recharge - Driosec iontodry Mode D'emploi

3.VI. End of the session
iontodry

4. Recharge

Note: iontodry
on the intensity and time selected. Before using iontodry
is recommended to fully charge the battery, in order to increase its lifespan.
If the device is not being used for a long period of time, ensure to regularly
recharge the battery.
When the battery indicator turns red, iontodry
battery level (1 or 2 sessions left). Charge the device after finishing
the session.
EN
To charge iontodry
48
between the units. After that, plug the charger
and into a wall outlet.
When the battery gets fully charged, a green light will appear in
iontodry
process takes approximately between 2 and 4 hours.
During the charge of iontodry
user can't perform a treatment while the device is plugged into the
electrical power supply.
1
The charger is not supplied with iontodry
is going to turn off automatically when the session is finished.
®
In case you want to switch it off manually, press the On/Off
button for 2 seconds.
is powered by a rechargeable battery. Its autonomy depends
®
, you have to previously disconnect the cables
®
. If the battery is completely discharged, the recharging
®
®
1
, it's use becomes restricted. The
®
.
®
for the first time, it
®
has reached a low
to the control unit