Driosec iontodry Mode D'emploi page 45

USER MANUAL
WARNING:
The skin must never be in contact with the aluminum electrode
when the device is switched on. If this happens, it may get burned.
Filling the treatment unit
2) Pour half of the water on each
of the lower compartments
of the treatment module of
iontodry .
®
Be careful not to wet the area
which separates the two
compartments.
That zone must remain dry
during the session to ensure the
effectiveness of the treatment.
3) Place the palm or heel on the upper compartment of iontodry
.
®
EN
The rest of the hand or foot should be extended through the
45
divider space, while fingers or toes get submerged in the lower
compartment. The treated areas are those which are underwater
or in contact with the wet iontodry foam pad covering the
®
other electrode.