Nicols SKY TEXT Manuel D'utilisation page 20

Count Down mode
KEYBOARD
Use the keyboard to access menu options, select laser patterns, and enter different modes. To use the keyboard with the
laser, do the following:
1. Connect keyboard to the port on the back of the USB socket
2. Connect the product to a suitable power outlet.
LED indicator flashes when sound is detected. Music mode displays the same design packs as
Music Mode
AUTO mode, but responds to sounds.
Laser runs on built-in Scene mode. Press the number buttons for the following design packs:
Scene Mode
<1> to <9> to <0>. The patterns all are flat line patterns
Text Mode Press to enter Text mode, then press any number button. Enter text using key board.
Press to enter. Press number button to setting value, then press the blank botton to start, and
press the blank botton then to pause
Previous Press to go to previous step
Next
Press to go to next step
Pause
Pauses the program. Press again to continue the program
Number Press to select a number
Mirror Press and hold to mirror the laser projection. Press repeatedly for up to 4 mirrored options.