Pioneer PDP-5060HD Mode D'emploi page 33

TV Guide On Screen™ System Setup
Screen 3: Do you have Cable?
• If you select "Yes", you see Screen 4.
• If you select "No", you see Screen 12.
Screen 4: Do you have a Cable Box?
• If you select "Yes", you see Screen 5.
• If you select "No", you see Screen 12.
Screen 5: Which TV Guide input is the cable box plugged
into?
• If you select Cable, you see Screen 6.
• If you make any other choice, you see Screen 7.
Screen 6: Cable Box Output Channel
• Select the channel used for the cable box.
• Press ENTER to display Screen 7.
Screen 7: Cable Box Configuration Diagram
• The diagram shows the correct way to install the G-LINK
cable from the back of the device to the cable box. Make
sure the G-LINK cable is properly installed.
• Press ENTER to display Screen 8.
Screen 8: Cable Box Brand Name
• Press / to select a cable box brand.
• Press ENTER to display Screen 9.
07
33
En