Items Supplied; Intended Use; Care And Maintenance - EINHELL BG-HR 60 Instructions D'origine

Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.

1. Items supplied

•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Original operating instructions

2. Intended use

The hose cart is designed to accommodate stan-
dard garden hoses (max. 60 meters/13mm (½")
- max. 35 meters/19mm (¾") of hose) for outdoor
use.
The hose cart is allowed to be used only for its
intended purpose. Any other use is deemed to be
a case of misuse. The user/operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind resulting from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
Anl_BG_HR_60_SPK1.indb 8 Anl_BG_HR_60_SPK1.indb 8
GB
3. Assembly (Fig. 2 - 8)
Follow the order of the illustrations.
Additional instructions:
Fig. 2: Push the union nut (10) over the upright tu-
bes (2, 4). Push the upright tubes into the mounts
of the tube connector (6) and screw them tight.
Take care not to damage the thread of the union
nut and tube connector when screwing tight.
Fig. 4: Screw the storage basket (9) securely to
the push-bar (3).
Fig. 5: Push the union nut (10) over the push-bar
(3). Push the push-bar into the mounts of the tube
connector (6) and screw it tight. Take care not to
damage the thread of the union nut and tube con-
nector when screwing tight.
Fig. 6: Plug the drum side parts (1) and the inside
parts (7) together.
Fig. 7: Hold the fi nished hose drum between the
assembled tubular frame. Press the crank (5)
through the location hole of the tube connector
(6) and the right-hand side part of the drum.
Fig. 8: Unscrew the hose connector (14) from the
straight side of the hose connecting piece (12).
Press the hose connecting piece from the inside
through the left-hand side part of the drum and
the tube connector. Screw the hose connector
(14) back in place. Make sure that both hose con-
nectors (13, 14) are securely seated on the hose
connecting piece (12).
4. Operation
The connecting hose between the tap and the
hose cart can be connected to the straight con-
nector (Fig. 8/14). Important: Turn off the tap when
not in use.

5. Care and maintenance

Check the hose connections regularly for leaks
and damage. Check the screw connections regu-
larly and tighten them if necessary.
- 8 -
06.08.15 10:29 06.08.15 10:29