Altrad Oregon TRON-2400L-40 Notice Originale page 19

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

S
y
m
b
o
l
s
o
S
y
m
b
o
l
s
o
Carefully read operator's manual before handling
the machine. Observe instructions and safety rules
when operating.
Shut off engine and remove power cord before
performing cleaning, maintenance or repair work.
When connecting cable is damaged or cut through
immediately pull out the power plug.
Wear hardhat, eye and ear protection.
Wear protective gloves.
Do not expose to rain. Protect against humidity.
maximum cutting length 400 mm
Electrical devices do not go into the domestic
rubbish. Give devices, accessories and packaging to
an ecofriendly recycling. According to the European
Directive 2002/96/EC on electrical and electronic
scrap, electrical devices that are no longer serviceable must be
separately collected and brought to a facility for an
environmentally compatible recycling.
S
y
m
b
o
l
s
O
p
e
S
y
m
b
o
l
s
O
p
Threatened hazard or hazardous situation. Not
observing this instruction can lead to injuries or cause
damage to property.
Important information on proper handling of the
saw. Not observing this instruction can lead to faults
in the chain saw.
User information. This information helps you to use
all the functions of the chain saw optimally.
Assembly, operation and servicing the chain saw.
Here you are explained exactly what to do.
Important notes for environmentally compatible
conduct. Failure to observe these instructions may
lead to environmental damage.
N
o
r
m
a
l
N
o
r
m
a
The chain saw is suitable for
− sawing of trunks, perches, wood trusses, boards etc. and
can be used for transverse or longitudinal cuts.
− Chopping down of trees.
n
t
h
e
c
h
a
i
n
s
a
w
n
t
h
e
c
h
a
i
n
s
a
w
r
a
t
i
n
g
i
n
s
t
r
u
c
t
i
o
n
s
e
r
a
t
i
n
g
i
n
s
t
r
u
c
t
i
o
n
s
i
n
t
e
n
d
e
d
u
s
e
l
i
n
t
e
n
d
e
d
u
s
e
Do not use the chain saw for sawing of building materials
and synthetic materials.
The chain saw is only suitable for the private use in the
house and hobby garden.
The chain saw is not suitable for forestry works (chopping
and cutting off of perches in the forest). The necessary
safety of the operator is not guaranteed by the cable joint.
The intended usage also includes compliance with the
operating, servicing and repair conditions prescribed by the
manufacturer and following the safety instructions included
in the instructions.
The relevant accident prevention regulations for the
operation as well as the other generally acknowledged
occupational medicine and safety rules must be complied
with.
R
e
s
R
e
s
Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety information" and
the "Intended usage" as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will
reduce the risk of personal injury or damage to the equipment.
Risk of backstrokes when touching the guide bar tip with a
hard object.
Risk of injuries of fingers and hands by the tool (saw chain).
Injury by catapulted workpiece parts.
Electric shock.
Risk from electricity, by using non-standard electrical
connections.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
Fire danger.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
S
a
f
e
t
y
S
a
f
e
t
y
Observe the following advices in order to protect yourself
and other persons against possible injuries.
Keep these security advices (operating instructions)
always together with the chain saw.
The chain saw shall only be operated by persons with
sufficient experience.
Give or lend the chain saw only to persons who are
familiar with the chain saw and its operation. Give
always the operating instruction to take with them.
Repair works on the device must be carried out by the
manufacturer or by companies appointed by the
manufacturer respectively.
i
d
u
a
l
r
i
s
k
s
i
d
u
a
l
r
i
s
k
s
i
n
s
t
r
u
c
t
i
o
n
s
i
n
s
t
r
u
c
t
i
o
n
s
19

Publicité

Chapitres

Table des Matières
loading

Produits Connexes pour Altrad Oregon TRON-2400L-40

Table des Matières