Description Of The Hood; Control - Elica ESI636SS Guide D'utilisation

Take apart the stainless steel panel by removing its screws
as shown in drawing.
A
A. 10 - stainless steel panel screws
Secure the lower duct cover to the range hood canopy
using 4 - 4.2 x 8 mm screws.
A. 4 - 4.2x8 mm screws
Replace stainless steel panel using the screws that were
previously removed. Place the panel to its original position.
A
A. Stainless steel panel
A
1.
2.
3.
5
4.
5.
A
Description of control panel
1.
2.
3.
4.
5.
6.
7.

Description of the hood

1
2
3
4
Blower and LED lamp controls
LED lamps
Grease filter handle
Grease filters
Duct covers

Control

1 2 3
Button ON/OFF motor (stand by)
Button for low speed (suction power) selection
When flashing, it indicates that you must wash the grease filter.
Button for medium speed (suction power) selection
Button for high speed (suction power) selection.
Button for intensive speed (suction power) selection
it lasts 5 minutes then it returns to medium speed
(suction power).
Button ON/OFF lighting
Press briefly to switch on or off the lighting of the hood.
Press and hold to adjust the intensity of the light.
Press again to turn the lamps off.
Automatic operation (sensor), connection with Golden
Induction Cooktop® and Diamond Cooktop®.
5
2
4 5 6 7
13