Removing The Charger; Maintenance And Care; Maintenance; Care - APA 16627 Manuel De L'opérateur

6.6 REMOVING THE CHARGER

Caution: First pull the plug out of the socket and observe the sequence for disconnection. This prevents sparks
from forming. Since charging generates a detonating gas, this is particularly important for the sake of your safety.
Disconnect the charger from the mains power supply.
Then disconnect the black callipers (minus). Then remove the battery callipers from the plus pole of the battery (red callipers).
Allow the battery to cool down.
Only for open batteries: Fill the cells with distilled water up to the level specified by the battery manufacturer. Close the
battery cells with the stoppers.

7. MAINTENANCE AND CARE

7.1 MAINTENANCE

The battery charger is maintenance-free when used in accordance with the intended purpose.

7.2 CARE

Clean the pole callipers every time the charging procedure is completed. Remove all splashed battery acid from the pole callipers
to prevent corrosion. Clean the device carefully with a dry cloth. Do not use liquids or chemical cleaning agents. Never submerge
the device in liquid. Never allow liquid to flow over the device.
Properly roll up the cable onto the holders supplied before storing the device in order to prevent damage to the cables and the
device. Store the device in a dry and clean location.

8. NOTES REGARDING ENVIRONMENTAL PROTECTION

The packaging is made up of environmentally friendly materials which may be disposed of via your local
recycling points. Do not put electrical devices into the household waste. Electronic and electrical devices
must be collected separately and sent for environmentally friendly recycling. Contact your community or town
administration for information regarding the disposal of electrics.

9. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
11