Declaration Of Conformity; Warranty Terms - VITO Pro-Power VICO7.5 Mode D'emploi

eN
Excessive moisture
in discharge air
Compressor runs
continuously and
safety valve opens as
pressure rises
Excessive starting
and stopping (auto
start)
Air leaking from un-
loader on pressure
switch
DeCLArATIoN
oF CoNFormITY
We declare under our exclusive
responsibility, that the product
Oil free compressor 6L, with the
code VICO7,5, meets the following
standards or standardization
documents:
EN 55014, EN 61000 and
EN 61029, according to the
determinations of the directives:
2014/30/EC - Electromagnetic
Compatibility Directive;
2006/42/EC - Machinery Directive;
2014/35/EC - Low Voltage Directive;
2000/14/EC - Sound power level
guaranteed: 97 dB.
S. João de Ver,
October 16th of 2015.
Central Lobão S. A.
Responsible for the Technical File
22
1. Excessive water in tank
2. High humidity
1. Defective pressure switch
2. Defective safety valve
Excessive condensation in tank
Check valve stuck in an open
position

WArrANTY Terms

15
The warranty of this machine is two
years from the date of purchase.
You should, therefore, keep your
proof of purchase during this period
of time. The warranty covers any
manufacturing defect in material or
operating, as well as parts and work
needed for their recovery.Excluded
from the warranty the misuse of the
product, any repairs carried out by
unauthorized persons (outside the
service center of the brand VITO) as
well as any damage caused by the
use of it.
1. Drain tank
2. Move to area of less humidity; use air line filter
: Water condensation is not caused by
NoTe
compressor malfunction
1. Replace switch
2. Replace safety valve with genuine replacement part
Drain more often
Remove and replace check valve
Do not disassemble check valve with air
DANGer!
in tank; bleed tank