Important - BST HIFE 1024 Mode D'emploi

ENGLISH
CAUTION
To prevent electric shock do not remove cover (or bottom) screws.
No user serviceable parts inside refer servicing to qualified
servicing personnel.

IMPORTANT

Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
DESCRIPTION
Mixer.
Function
1. DJ/MIC CHANNEL
The COMBO microphone input accepts a ¼ '' or XLR
connector and accepts also balanced microphones.
2. ROTARY GAIN CONTROL
Used for adjusting the level of the input signal, useful to
harmonize the level of all the input.
3. EQUALIZER
These three rotary levels are used to adjust the frequency
response of each channel. They correct the signal in a
–26dB/+12dB range.
4. SAM ON/OFF
Used to choose the channel you want to send to the sampler
in order to be recorded. When the channel is selected, the
light ner the selector switches on.
www.BSTsound.com
5. ECHO ON/OFF
Used to choose the channel you want to send to the echo.
When the channel is selected, the light near the selector
switches on.
6. SEND ON/OFF
Used to choose the channel you want to send to the EFX
OUT ouput in order to be modified by an equalizer or an echo
chamber. When the channel is selected, the light near the
selector switches on.
7. CUE ON/OFF
Used to choose the channel you want to hear in the
headphone. When the channel is selected, the light near the
selector switches on
8. ROTARY CHANNEL LEVEL CONTROL
The channel level slide control can be used to adjust the
individual input to obtain the desired volume.
9. TALK-OVER SELECTIONS SWITCH.
This selector has three positions :
OFF : The talk-over don't work.
ON : The volume of every channel decreases ( except
AUTO : When the DJ speaks in the microphone, the volume
10. MUTE LEVEL.
Used to adjust the mute level of the talk-over.
11. CROSS-FADER ASSIGN OFF CONTROL SWITCH
Each cross-fader assign selector has its own ON/OFF switch.
When you press this button ( the light switch on ), the side of
the cross-fader you have pushed becomes inactive.
12. CROSS-FADER ASSIGN SELECTOR
This selector permits the linking of the CH 1-2-3-4 SOURCES
of the left and right part of the CROSS-FADER.
5
MIC DJ ) until mute maximum value.
The music comes back to its normal level when you
reselected the selector on the OFF position
of every channel decreases until the mute level you
adjust with the mute level control ( button 10 )
when the DJ stop to speak, the volume comes back
to its normal level