Electronic Control Panel - ProFlow PF-MMX Instructions D'installation Et D'emploi

11. Press the scroll button again; the display will show
(only when the regeneration mode is set to 'Dlyd' or
'Dlyd/Immd'):
Rsrv: Variable
•
Press the up or down
capacity:
 Variable: the reserve capacity is calculated
automatically, based on the registered daily water
usage.
 Fxd: press the scroll
up or down
capacity to a fixed amount.
12. Press the scroll button again; the display will show:
AUX2: Regen
•
Press the up or down
of auxilliary contact 2:
 Regen: aux. contact is powered during entire
regeneration (does not include refill and brine
preparation cycles!).
 Chlor.Cell: aux. contact is powered at start of
brine draw/slow rinse cycle. Press the scroll
button again and press the up
button to set the duration of activation of the
chlorination cell.
 Maintenance: aux. contact is powered when
Maintenance Reminder is triggered.
 Error: aux. contact is powered when timer failure
occurs.
13. Press the scroll button again; the display will show:
Exit
•
Press the up or down
program into the
programming level.
EN - English

ELECTRONIC CONTROL PANEL

button to set the reserve
button again and press the
button to set the reserve
button to set the function
or down
button to save the
NOVRAM® and exit the
Page 12