Dual Zone operations
Playing back two sources
You can connect external audio equipment
to the 2nd AUDIO OUT plug on the rear,
and play back a disc separately from the
source selected on the unit.
You can activate Dual Zone while listening to
any source.
• When Dual Zone is in use, you can only
operate the DVD/CD player using the remote
controller.
On the remote controller:
1
Activate Dual Zone.
The source automatically changes to
"DISC" and
To select a different source to listen through
the speakers, press SOURCE on the control
panel.
• By using the buttons on the control panel,
you can operate the newly selected source
without affecting Dual Zone operations.
2
Adjust the volume through the 2nd
AUDIO OUT plug.
3
Operate the DVD/CD player using
the remote controller by referring to
the monitor screen.
To cancel Dual Zone operations, repeat step 1.
(
disappears.)
40
at a time
appears on the monitor.
On the control panel:
You can also activate and deactivate Dual Zone.
1
SOURCE
MENU
2
Select "D-ZONE".
3
Select "On".
The source automatically changes to
"DISC" when Dual Zone is activated.
To cancel Dual Zone operations, select "Off"
on step 3.
OK
OK