Technical Information; Installation Considerations - Hansgrohe Axor Starck Organic 12016 1 Série Instructions De Montage / Mode D'emploi / Garantie

T EC HN IC A L I N F ORMAT IO N
Water pressure
Recommended
Maximum
Hot water temp.
Recommended
Maximum
Flow rate - 12018001
handshower
spout @ 44 PSI
Flow rate - 12016001
handshower
spout @ 44 PSI
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
I NSTA LL AT I O N CO N SID E R ATI ONS
⁄ For best results, Hansgrohe recommends that this unit
be installed by a licensed, professional plumber.
⁄ Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
T his tr im is for use wit h rou gh 10 45 2181
(not i n cl ud ed). T h e roug h mu s t be
i ns ta lle d an d t he f inis he d f loor s ur fac e
c omplet ed a nd m ad e wate r tig ht.
⁄ Protection against backflow is provided by check
valves.
⁄ To prevent scald injury, the maximum output
temperature of the shower valve must be no higher
than 120°F. In Massachusetts, the maximum output
temperature can be no higher than 112°F.
This unit meets or exceeds the following:
• ASME A112.18.1/ CSA B125.1
• Listed by IAPMO for use in the US
and Canada
2
15 - 75 PSI (0.1 - 0.5 MPa)
145 PSI (1 MPa)
120°-140° F (48° - 60° C)*
158°F (70° C)*
max. 1.75 GPM (6.6 L/min)
5.3 GPM (20 L/min)
max. 2.0 GPM (7.6 L/min)
5.3 GPM (20 L/min)
E N G L I S H
⁄ 12018xx1 only: This showerhead is for use with an
automatically compensating valve rated at 1.3 GPM
(4.9 L/min)or less.
⁄ 12016xx1 only: This showerhead is for use with an
automatically compensating valve rated at 1.5 GPM
(5.7 L/min)or less.
⁄ Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.