BREIL 6U50 Mode D'emploi page 9

Table des Matières

Les langues disponibles

2 seconds after releasing buttons

and

. This completes the

reset procedures. A confirmation

beep is heard on completion of the

reset operation.

IMPORTANT

The initial setting must be carried out after each battery replacement in order to ensure

correct operation. If the setting operation is not fully completed, the date, timer and

chronograph functions will not function properly .

• If the initial setting is not completed as shown on page 4, a warning signal is

activated; the date hand begins moving anti-clockwise, indicating that the initial

setting have still to be completed.

Press button

and year hands at 12.

Press button

at 12 (position 0.0).

Press the crown in fully to complete the

initial setting. The day hand (mode hand)

points to Sunday .

•

See page 8 for further details of the

functions of each hand on the watch.

and position the month

and position the day hand

Table des Matières

Chapitres

Table des Matières