Cleaning And Storage - gourmetmaxx AMG31B-100 Mode D'emploi

Use for preparing spritz biscuits
1. Prepare the spritz biscuit dough according to your recipe.
2. Place the motor unit (6) on an even, stable surface.
3. Insert the mincing attachment (8) and the screw conveyor (9) into the device in the
manner described in "Use for Chopping Up Meat and Fish".
4. Place the spritz biscuits attachment onto the screw conveyor and fi x it with the lo-
cking nut (13). Do not overtighten!
5. Insert the baking form bar into the spritz biscuit attachment up to the required form.
Take care that you push the bar into the spritz biscuit attachment with the handle to
the front.
6. To switch on the device, move the I / 0 / R button (7) to the I (On) position.
7. Add the spritz biscuit dough in the fi ll chute. Use the plunger (3) to gradually push
the dough through the fi ll chute.
8. To switch the device off again, move the I / 0 / R button to the 0 (Off) position.
9. Remove the mains plug from the plug socket after use.
10. Divide the dough strand into equal sized parts and bake the spritz biscuits according
to recipe until done.
11. Clean the device and the used accessories after each use (see „Cleaning and Sto-
rage").

Cleaning and Storage

PLEASE NOTE!
■ Remove the mains plug from the plug socket before cleaning the device.
■ The device and accessories are not suitable for dishwasher use.
■ Do not use any caustic or abrasive cleaning agents for cleaning. These can damage
the surface.
1. If you have not already done so, switch off the device and pull the mains plug out of
the plug socket.
2. Dismantle the device in the reverse order:
– remove the storage bowl (4),
– undo the locking nut (13),
– remove the used insert,
– if needed remove the cutter head,
– take out the screw conveyor,
– remove the mincing attachment (8) or the vegetable slicer adapter (2) by pressing
the release button (5) and turning the attachment to the right at the same time
(towards the I / 0 / R button (7)).
3. Remove any possible food residues and clean all parts (apart from the motor
unit (6)!) with warm water and mild detergent.
4. Then dry all parts thoroughly.
5. If necessary, wipe down the motor unit with a slightly damp cloth.
6. Store the device and all accessories in a clean, dry place which is not accessible to
children and animals.
23 EN