Height Adjustment Of The Feet; Technical Data; Cleaning | Maintenance; Cleaning & Maintenance - DeVilbiss Healthcare Drive DS 130 Mode D'emploi

Height adjustment of the feet

1
Ensure that all four legs are adjusted to the same height.

Technical data

Product
Article number
HMV-No
Total width, lowest position / Highest position
Overall height lowest position / Highest position
Overall depth lowest position / Highest position
Seat width
Seat depth
Seat height
Total weight
Load max.
Material frame
Material Seat section
Drive Medical GmbH & Co. KG | As per: 22.06.2020 | Errors and alterations excepted
Before using the product, ad-
just it to the desired height
(pic. 1). To adjust the height of
the legs:
Press button (1) and at the
same time, pull the leg out
or push it in until the button
clicks into place in the de-
sired position (2). Ensure that
the pushbutton has correctly
clicked into place.

Cleaning | Maintenance

• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• Check the screws regularly and tighten, if necessary.
• In the event of defects, contact your specialist dealer
from whom you purchased this product.
550200200
04.40.03.1021
53 cm / 54 cm
62 cm / 72 cm
55 cm / 57 cm
42 - 52 cm
Aluminium
EN
DS 130
41 cm
41 cm
2,8 kg
130 kg
PE-HD
Instructions for use DS 130
9