Mitsubishi Electric QAHV Série Manuel D'installation & D'instructions page 78

<7> Operation status monitoring
Function description
Check the running information of each unit from the remote controller
Button operation
1
2
3
Select "Running information" from the main menu screen, and press the
[Select] button.
Set the desired M-NET address with the [F2] and [F3] buttons, and press the
[Select] button.
Enter a 3-digit running information number, and press the [Select] button.
The setting information send screen appears.
When the information is sent successfully, the running information values
appear in the result display screen.
To continue operation, press the [Return] button to return to the screen of step
2.
Set other M-NET address and running information number using the same
procedure.
Navigating through the screens
■ To return to the Service menu ...... [Menu] button
■ To return to the previous screen ...... [Return] button
GB-78