LD Systems VIBZ 6 Manuel D'utilisation page 7

6
EQUALIZER LOW CHANNEL 1 / 2
Equalizer bass band for channels 1 or 2 (80 Hz, +/-15 dB). When turned to the left, levels are lowered, when turned to the right, they are
raised. In the centre position (resting point), the equalizer is inactive.
7
LEVEL DFX / AUX POST CHANNEL 1 / 2
Controller for adding the signal from channel 1 or 2 to the internal digital effects device (only on LDVIBZ6D), or to an external effect device.
The effect way is switched post-fader, so the signal is taken after the channel level control. Use the Line Output AUX SEND (N 36) for
activating an external effect.
8
PAN L / R CHANNEL 1 / 2
Using the Panorama controller, position the signal of the corresponding channel in the stereo field of the total signal (Centre position =
perception of the signal in the middle of the stereo field).
9
PEAK-LED CHANNEL 1 / 2
Once the red Peak LED lights up, the corresponding channel is operating at the distortion limit. Adjust the Gain controller (N 3) so that the
peak LED of the corresponding channel only lights up briefly when signal peaks occur. Avoid the permanent lighting of the peak LED by
reducing the input gain or input sensitivity.
10
LEVEL CHANNEL 1 / 2
Volume controller for channels 1 or 2. Turning the dial to the right increases the volume and turning it to the left decreases it.
11
LINE IN L / R CHANNEL 3/4 OR 5/6
Unbalanced inputs for the stereo channels 3/4 or 5/6 with 6.3 mm jacks to connect external devices with line level (e.g. keyboard). If only
the left input jack is used (L), the channel will be mono.
12
EQUALIZER HI CHANNEL 3/4 OR 5/6
Equalizer high band for channels 3/4 or 5/6 (12 kHz, +/-15 dB). When turned to the left, levels are lowered, when turned to the right, they
are raised. In the centre position (resting point), the equalizer is inactive.
13
EQUALIZER LOW CHANNEL 3/4 OR 5/6
Equalizer bass band for channels 3/4 or 5/6 (80 kHz, +/-15 dB). When turned to the left, levels are lowered, when turned to the right, they
are raised. In the centre position (resting point), the equalizer is inactive.
14
LEVEL DFX / AUX POST CHANNEL 3/4 OR 5/6
Controller for adding the signal from channel 3/4 or 5/6 to the internal digital effects device (only on LDVIBZ6D) or to an external effects
device. The effect way is switched post-fader, so the signal is taken after the channel level control. Use the Line Output AUX SEND (N 36) for
activating an external effect.
15
BAL L / R CHANNEL 3/4 OR 5/6
Use the balance controller to set the relative volume between the left and right part of the connected stereo signal. When only the left socket
L (MONO) of the input is in use, the controller performs the function of a Panorama controller.
16
PEAK-LED CHANNEL 3/4 OR 5/6
Once the red Peak LED lights up, the corresponding channel is operating at the distortion limit. Adjust the output level of the source device so
that the peak LED of the corresponding channel only lights up briefly when signal peaks occur. Avoid the permanent lighting of the peak LED.
17
LEVEL CHANNEL 3/4 OR 5/6
Volume controller for channels 3/4 or 5/6. Turning the dial to the right increases the volume and turning it to the left decreases it.
18
DFX PRESETS (MODEL LDVIBZ6D ONLY)
16 different effects presets are available to you. Use the rotary encoder to select one of the presets as desired.
7