Technical Specification - PIXO C-USB Mode D'emploi

Technical specification

Li-Ion / Li-Po charge function
• Unique snap-in support and contact method without additional adapter
plates
• Special microprocessor to control voltage conversion and all charge
processes
• Short circuit protection with automatic polarity and voltage detection
• Smart Vmax charge with faulty battery pack detection, top-up charge and
overcharge protection
• Battery Activator function to revive deep discharged Li-Ion batteries
• Charging times 2-8 hours depending on USB-Mode, battery charge status,
voltage and capacity
• Li-Ion / Li-Po charge output rating: 4.2 VDC / 8.4 VDC 200-600mA
NiMH / NiCd charge function
• Unique snap-in support and contact method for 1-2 NiMH / NiCd 1.2 V AA
Mignon or AAA Micro batteries
• Special microprocessor to control voltage conversion and all charge
processes
• Smart deltaV low temperature pulse charge methode, trickle charge and
overcharge protection
• Charging times 4-8 hours depending on USB-Mode, battery charge status,
voltage and capacity
• NiMH / NiCd charge output rating: 2 x 1.4 VDC 300-500 mA
Generic technical specifications
• Use it where ever you go. At home or mobile. USB is a world standard.
• USB 2.0 / 1.1 compatible with a limited power consumption of 5 VDC 500 mA
• USB 3.0 compatible with a limited power consumption of 5 VDC 900 mA
• Compact and light base unit with 125 x 65 x 27 mm and 85 grams
• Two LEDs for visual indication of charge process
• eco-design with < 0.1 Watt stand-by mode PC grid power consumption
Scope of supply (what is in the box)
Base Unit, USB cable, Users Manual