PIXO C-USB Mode D'emploi page 6

Instruction manual
PIXO C-USB Universal Charger
Congratulations on purchasing the Pixo C-USB. The charger is powered via
the USB 2.0 / 1.1 or USB 3.0 interface. There is no data communication between
the computer and the charger.
You can use also a optional USB wall charger / power supply or a USB car
cigarette lighter charger / adapter to power the charger. The generic wall
charger / power supply / adapter should have the following output power:
USB 2.0 / 1.1 Mode VDC 5V min. 500 mA. USB 3.0 Mode VDC 5V min. 900 mA.
You can charge the following batteries with the C-USB:
All* 3.6-3.7 V or 7.2-7.4 V Li-Ion / Li-Po Battery Packs from Digital Cameras,
Camcorders and all removeable batterie packs from mobile phones, PDAs
and other devices
*The following battery packs cannot be charged:
Battery packs which communicate with the camera or the original charger.
For example Canon BP-809, BP-819,
BP-827 or Canon LP-E6. Battery packs with different voltage. For example
CR-V3 und CR123A with 3V or Nikon EN-EL4 with 11.1V. Battery packs with
special contacts. For example Koyocera BP-800/1000 or Leica M8.
Please visit www.pixo.de for up-to-date information
1-2 NiMH / NiCd 1.2 V AA Mignon or AAA Micro Rechargeable Batteries