Explanation Of The Symbols; Additional Safety Instructions - Batavia MAXXPACK BT–CJS002 Mode D'emploi

Dear customer
Please familiarize yourself with the proper
usage of the device by reading and following
each chapter of this manual, in the order
presented. Keep these operating instruc-
tions for further reference.
Please read the enclosed "General safety
instructions for power tools" and all
additional safety instructions in this
operating instructions!
This manual contains important information
on operating and handling the device. Keep
these operating instructions for further
reference. Please pass it on along with the
unit if it is handed over to a third party.
Battery and charger not included!
The battery is available separately under
art. No: 7062517 (2Ah) or 7062518 (4Ah).
The charger is available separately under
art. No: 7062519.
These items are available online and in par-
ticipating stores.

1. Explanation of the symbols

The following symbols are used in the user
manual or on the product:
Warning! To reduce the risk of
injury, the user must read the
instruction manual.
Denotes risk of personal injury, loss
of life or damage to the tool in case
of non-observance of the instruc-
tions in this manual.
Always wear hearing protection.
The effects of noise can cause
hearing loss.
CE stands for "Conformité
Européenne", which means "In
accordance with EU Regulations".
With the CE marking, the manufac-
turer confirms that this Electric tool
complies with the applicable Euro-
pean directives.
Do not dispose of electric power
tools with domestic refuse.

2. Additional safety instructions

• Please read this manual carefully and
use the unit only according to this
manual.
• Dispose of used packaging material
carefully or store it out of the reach of
children. There is a danger of
suffocation!
• Persons with limited physical, sensorial
or mental abilities are not allowed to use
the machine, unless they are supervised
and briefed for their safety by a qualified
person.
• The unit is not a toy and does not belong
in the hands of children. Never leave the
unit unsupervised when in use. Keep it
out of reach of children or persons in
need of supervision. Children should be
supervised to ensure that they do not
play with the unit.
• Do not cut or saw where there may be
hidden electricity, gas or water utility
services.
• Periodically check all nuts, bolts and
other fixings and tighten where
necessary.
• Should the unit become damaged do not
use it any further and have it repaired by
a professional or contact our customer
service. Do not disassemble the unit or
try repairing it yourself.
• Do not let familiarity gained from fre-
quent use of tools allow you to become
complacent and ignore tool safety princi-
ples. A careless action can cause severe
injury within a fraction of a second.
• Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slip-
pery handles and grasping surfaces do
not allow for safe handling and control of
the tool in unexpected situations.
• Hold the power tool by insulated gripping
surfaces when performing an operation
where the cutting tool may contact hid-
den wiring. Contact with a "live" wire will
also make exposed metal parts of the
power tool "live" and give the operator an
electric shock.
• Use clamps or another practical way to
secure and support the workpiece to a
English
5