Slendertone Arm Toner Mode D'emploi page 8

positioning the garments correctly
1. Take the garment connected to the GOLD lead and place the larger section centrally over
the triceps muscle of your RIGHT arm. Ensure the wider part is towards your elbow.
2. Then, bring the strap around the OUTSIDE of your arm and place the small, oval
section centrally over your biceps muscle. Then fasten the strap securely, but
comfortably, around your arm.
3. Repeat steps 1 and 2, placing the garment connected to the BLACK lead onto your
LEFT arm.
1 2
8
4. Switch on your control unit by pressing the On/ Off button for 2 seconds. Select the
program you wish to use and increase the intensity to a strong, comfortable level.
I
MPORTANT
- Before you increase the intensity, make sure that all of the silver studs are completely
covered by the GelPads. Press the edges of each one firmly onto the material before use.
- You may feel a tingling sensation in your lower arms during a session. Simply changing
the position of your arms can reduce this. If it persists, pause the unit and adjust the
position of the arm garments slightly.
3
:
4
When you have completed your session, remove the garments, replace the liners
on the GelPads and store the unit safely until your next session.
Important:
Always ensure the unit is switched off before removing the garments.
Have any further questions? Just visit the website: www.slendertone.com or call
our Toll Free number: 1-800-551-2443