Eagletone DPW 100 Guide De L'utilisateur page 30

Finalize installation
Now, components installation is finished.
Nest steps are:
1.
Plug the pedal cable to the socket on the socket board in the back of the piano.
Attaché the cable on the stand with clips.
2.
Plug the speaker box cable to the socket on the bottom of the piano.
3.
Locate the Power Cord and plug it into the Receptacle on the back of the Piano. Plug
the Power Cord into an appropriate wall socket.
NOTES: Unplug the piano during lightning storm or when unused for long periods
of time. Avoid plugging the AC adaptor into the same AC outlet as appliances with
high power consumption, such as electric heaters or ovens.
FRONT
Holes for Headphone
Hanger Clip to
attach to the
bottom of the piano
2. Place the piano in its final position, on the bottom the pedal board is a
turn down knob. Turn the Pedal Brace Knob down to firmly touch the
floor.
3. Locate the Power Cord and plug it into the Receptacle on the bottom of
the Piano. Plug the Power Cord into an appropriate wall socket.
4