Ptz Control; Digital Zoom - urmet domus DS1093 Manuel Utilisateur

4.5

PTZ CONTROL

We introduced setting PTZ parameters previously in chapter 5.2.6.3. Here we will discuss
how to operate PTZ controls.
Pop up the Pop-up Menu to highlight and enter into [PTZ control] menu. Now user can
control the camera with Pan, Tilt and Zoom capabilities.
Click [Zoom-/+] button to zoom in / out the image; Click [Focus -/+] button to focus the image;
Click [Iris -/+] button adjust iris to open or close.
Cruise set
Open auto cruise function on PTZ setting menu if you want to setup cruise function
(system default: off), and set up cruise channel, cur point and total quantity and stop
time etc.
 Channel select: select the channel with the PTZ camera
 Total: set up pre-set bit quantity
 Cur Point: indicates starting point cruised. System default point is 01.
 Stop time: sets the stop time at each point
 GOTO: allow you go to a specific preset point.
 Set: allow you set a set of specific preset points of a PTZ camera.
1. Select a camera you desire to set a preset point;
2. Adjust the camera in a desired direction
3. Click [Set] to set the point as preset point
4. Click [Save] to save the preset point
5. Follow the above step to add one more preset point.
 Clean: allow you delete one selected preset.
 Note: Up to 254 presets bit for the model can be stored. However, actual preset quantity differs depending on PTZ
performance.
4.6

DIGITAL ZOOM

DS1093-038
This option allows to select a channel in full screen mode and zoom in on the
image in LIVE mode. By right clicking on the channel displayed in full screen
mode, it is possible to select the option DIGITAL ZOOM.
Now it is possible to select the area to be enlarged with the mouse, by keeping
the left button pressed and dragging the area. On the bottom right the user can
see in a window the whole channel images with the area to be enlarged,
selected in a red box. To disable this function, right click.
99