Monitor Selection - urmet domus DS1093 Manuel Utilisateur

4.14 MONITOR SELECTION

This Function allows to control the OSD Menu switching between BNC video Output and VGA Video Output.
It is possibile to switch the Osd Menu on video Output, using Mouse(i.e. selecting the relative Video Output from Pop-up Menu),
using Remote Control (i.e. Selecting 0 Key) or DVR front Panel (i.e. see the instructions below).
Sch.1093/004A and 1093/008:
In order to switch Menu Control on Video Output, press and hold "REW" Button on Front Panel and release it after audible
warning is heard.
Sch.1093/016:
In order to switch Menu Control on Video Output, it is needed to select the following sequence button on Front Panel:

MENU/ESC

UP Button

Enter Button
NOTE:
Pay attention to press the buttons one time, if te sequence is failed reboot the DVR and waiting for the completed DVR Power
cycle, after that repeat the Procedure above.
DS1093-038 101