Record Setup - urmet domus DS1093 Manuel Utilisateur

4.2.2

RECORD SETUP

Click [Main Menu] [Record] to enter into [Record Setup] menu.
 [Frame rate] include two options – Fixed and Manual. When set to "Manual" and click [Frame rate setup] option, you may
allocate the frame rate for each channel.
 [Mode] allow you select record modes, including Always and Scheduled. To record 24 hours a day set the [Mode] to Always.
To record on motion or a set schedule, select the [Schedule] option
When setting [Mode] to Schedule, the schedule screen will appear as shown in Picture 5-6.
After you complete the schedule setting please activate it by clicking the [Apply] button.
Please note that 01~07H is defaulted to No record, 08~18H to Normal and 19~00H to Alarm.
Explanation: On the [record Set] and [Search] mode, original color stands for no record, "Red" stands for alarm record, "Green"
stands for normal record.
DS1093-038
 [Record] option allows you set up recording status
(Enable/Disable) of each channel.
 [Audio] option allows you turn audio on/off.
 [Quality] include three options – Best, Good and Normal.
 [Pack time] indicates maximum continuous record time (15,
30, 45 and 60 min).
[Record CH] options include All, CH-1, CH-2, CH-3, CH-4, CH-5...CH-16 in
turn. Please click the channel you need.
To setup weekly schedules, tick-select the box of the record status you want
(Alarm, General, or No Record) and then click on each box in the schedule time
line that you want this method to apply to. You can use the [From – To] pull-
down menus and Copy button to copy settings from one day to another day or
all days.
77