urmet domus DS1093 Manuel Utilisateur page 66

SCH.1093/004A – 1093/008
PARTICULAR DETAIL DESCRIPTION
Power Led: indicates that the device is powered
HDD Led: indicates that the hard disk is in use (read/write)
IR Sensor: I.R. signals receiver for remote command
CH1 Button: button for full screen display of camera 1 images.
(only for Ref. 1093/004A)
CH2 Button: button for full screen display of camera 2 images.
(only for Ref. 1093/004A)
CH3 Button: button for full screen display of camera 3 images.
(only for Ref.1093/004A)
CH4 Button: button for full screen display of camera 4 images.
(only for Ref. 1093/004A).
QUAD Button: button used to display all the cameras (only for Ref.1093/004A)
SEARCH Button: Used to open the Playback interface and perform the tracks search (only for
Ref.1093/008)
MUTE Button: Used to enable/disable the AUDIO function (only for Ref.1093/008)
CH- Button: Used to select the channel before the current one. (only for Ref.1093/008)
CH+ Button: Used to select the channel following the current one (only for Ref..1093/008)
ALL Button: Shows all the cameras (only for Ref.1093/008)
REW Button: fast backward button; used to move left in the menus / rewind during playback / Switch
video output control menu (i.e. VGA or MAIN BNC) with pressure and hold Button about 5 seconds.
PAUSE Button: still image button; to restart the playback use the button play. Allows the frame by
frame playback.
PLAY Button: playback button; used to start play. Used to access the playback menu.
FWD Button: fast forward button. It allows the fast playback of images at various speed. Press many
times to change the speed.
STOP Button: stop button; stops play and record functions.
REC Button: record button; starts the operation.
USB port: connection port for a USB device (Flash Drive, Hard Drive).
DS1093-038 66