Network Set - urmet domus DS1093 Manuel Utilisateur

4.2.3

NETWORK SET

DNS: DNS server is generally provided by local ISP. Herein please enter the IP address of your DNS.
Note: When there are multiple DVRs at the same LAN, you need to change the MAC address.
When selecting DHCP the router will allocate DVR IP address automatically after you exit the menu. The IP address of the DVR
might change whenever the unit is turn on.
When selecting Static from the Type, user can directly set IP address, Subnet Mask, Gateway, Web Port and DNS s.
When selecting PPPoE form the Type, user can input user name and password provided by ISP and set Media and Web port.
You can visit your DVR via public network without port forwarding when network type is set to "PPPoE" and web port is right.
At the bottom of the NETWORK SETUP window there is an option to setup a DDNS service of the DVR shown as Picture 5-
10.You can access the DVR through a static or dynamic IP address; however a dynamic address can change from time to time.
How often depends on your service provider. When it changes you need to go to a website such as www.myipaddress.com from
a computer attached to the same router as the DVR to find out what the new IP address is. There are two solutions to this
problem. One would be to get a static IP address from your service provider so that you do not have to be concerned with the
address changing. Another solution would to use a dynamic domain name service to get a domain name that can be linked to
your dynamic address. You can register on DVR2009.3322.org website and get a domain name, user name, and password. You
can then enter your dynamic domain name into an Internet Explorer browser instead of an IP address and be directed to
whatever the current dynamic IP address is, so that you can always access the DVR by entering the same address. You can get
more information on how to use these services from www.dyndns.com website.
DS1093-038
Enter into [Main MenuNetwork Setup] to setup the network configuration:
After selecting network mode - such as DHCP, PPPOE or static allocation- and setting
up web ports,you can visit DVR remotely through a network or internet.
79