Malfunctions - JAC PICO 450 Notice D'utilisation Originale

10 MALFUNCTIONS

Problem
The machine is not running
The machine is running, but
the loaves are damaged or
cut unevenly
The bread vibrates between
the blades
The bread is cut too slowly
The bread tears
The bread emerges very
slowly or remains between
the blades
The bread is squashed
coming out of the blades
WARNING: The machine must be isolated from the power supply before attempting any work on it.
Connect the machine using the cable (fig.1, n°13).
Unlock the emergency stop (fig.1, n°11)
Close the cover.
Close the door.
Check whether the blades need replacing (fig.6,7,8).
Leave the bread to cool down for a few hours.
Feed in a loaf of the specified size.
Feed in a loaf that is sufficiently firm.
If the blades are misaligned, adjust the blades and frames.
If the blades are misaligned, adjust the blades and frames.
Check whether the blades need replacing (fig.6,7,8).
Check that the loaf holder springs are in place correctly (fig.10, n°27).
If the blades are misaligned, adjust the blades and frames.
Check that the loaf holder springs are in place correctly (fig.10, n°27).
Check that the loaf holder springs are in place correctly (fig.10, n°27).
Remove a loaf holder spring and repeat your test (fig.10, n°27).
Should the problem persist, please contact your technician.
Check
15
English