Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION.
If necessary, insert an SD card
(not supplied (use Kingston or
transcend)) into the SD card slot
of the indoor unit.
(Note: SD card is required for
firmware update)
Then connect the indoor unit
POWER
to a universal usb adapter by
plugging the USB plug into this
adapter or socket. Make sure
that the QR code can be scanned
by the smart phone.
Remove the rubber cover on the
underside of the door camera
and charge the battery of the
door camera using micro usb
cable.
Mount the wall plate in a suitable
place near the door so that the
camera can be placed in it.
The camera must first be paired
to the indoor unit for definite
mounting.
See Quick Starters Guide for registering the
camera to the app. and router.
-12-
Publicité
