Rs232/Lan Command Tables - Kimex 163-4320 Manuel D'utilisation

RS232/LAN Command Tables

Command
GETVOLUME
HEADPHONEVOLUME
GETHEADPHONEVOLUME
GETMUTE
SETMUTE
SETSOUNDMODE
SETBALANCE
GETBALANCE
SETAVL
GETAVL
SETDYNAMICBASS
SETEQUSERFREQ
GETDIGITALOUT
SETEQMODE
SETDIGITALOUT
VOLUMEUP
VOLUMEDOWN
AUDIO COMMANDS
Description
Volume level information. no parameter
"Set headphone volume
level."
"Headphone volume level
information."
Get mute value on/off.
Set mute value on/off.
"Set sound mode.
SETEQUSERFREQ
100Hz 10"
Set balance value.
Get balance value.
Set AVL state.
Get AVL state.
Set dynamic bass state.
Set equalizer user freq.
value for any band.
Get digital out.
Set equalizer mode.
Set digital out.
"Inrease Volume Level
by 1 step
(Until max volume) "
Decrease Volume Level
by 1 step
English - 20 -
Parameter
integer n (0 ≤ n ≤ 100)
no parameter
no parameter
no parameter
"integer n (0 = mono, 1 =
stereo, 2 = dual I, 3 = dual
II, 4 = mono left, 5 = mono
right)"
integer n (-50 < n < 50)
no parameter
integer n (0 = off, 1 = on)
no parameter
integer n (0 = off, 1 = on)
"string n (120Hz, 500Hz,
1.5KHz, 5KHz, 10KHz)
integer n -13 < n < 13
Example:
SETEQUSERFREQ 120Hz
10"
no parameter
string n (Music, Movie,
Speech, Flat, Classic, User)
string n (compressed, pcm)
no parameter
no parameter
Return
#*volume level is ...
#*set headphone volume to n
#*headphone volume is ...
"#*MUTE OFF
or
#*MUTE ON"
"#*MUTE OFF
or
#*MUTE ON"
"#*setSoundMode() set to n
or
#*Invalid sound mode entered"
"#*set balance level to n
or
#*invalid balance level entered"
#*balance level is ...
#*set avl state to n
#*avl state is ...
#*set dynamic bass state to n
"#*setEQUserFreq() set to n or
#*Incorrect sound system
parameter entered
or
#*Incorrect equalizer mode. It
should be USER mode"
#*digital out is pcm or #*digital
out is compressed
"#*setEQMode() set to n
or
#*Incorrect equalizer parameter
entered"
#*setDigitalOut() set to n OR
#*Incorrect digital out mode
parameter entered
"#*volume LEVEL is increased
to ...
or
#*You can NOT increase volume
LEVEL further. Confirmed Max
Volume Level is ..."
"#*volume LEVEL is decreased
to ..
or
#*You can NOT decrease volume
LEVEL further. Current Volume
level is ... "