Software Version - Kimex 163-4320 Manuel D'utilisation

Signage Menu Contents
Device Info
Set ID

Software version

Serial number
Model name
Save model
information
Display Life Time
Power Up Settings
Power Up Mode
Quick Standy
Power on Delay
Auto Launch
HDMI1 Wake Up
USB
Clone to USB
Clone from USB
Copy app cache
from USB
USB Information
USB Operations
USB Option
Video Wall Settings
Link options
Volume Settings
Reset to Default
Values
Sets the device ID. You can select a value between 0-99 using the numeric buttons
on the remote in order to identify your Display.
Displays current software version.
Displays serial number of the unit. (Cannot changed by user)
Displays model name of the unit. (Cannot changed by user)
Copies the model information data of the unit to a connected USB device.
Displays the duration of life of the unit.
Configures the power up mode preference. Last State, Always On and Standby
options are available.
If this feature is enabled the Display can be turned on again with the RS232 and LAN
commands if it is turned off through it. Press Left or Right button to enable or disable
the feature.
Sets a delay value at power on. This value can be set from 0 to 2000 ms in steps of 100
ms. The Display will turn on after the set delay time is expired.
Configures the auto launch preference. CMS(Start url), Open Browser(Open Browser
initial page) and Disabled options are available.
If this option is set as Enabled, the Display will turn on with the HDMI input source,
when it is switched on. This feature works based on HDMI 5V signal. When this signal
is active the Display wakes up and when the signal is inactive the Display shuts down.
You can disable this option by setting as Disabled.
If any Scheduler is set or an OPS unit is connected to the Display, this option will be
inactive and can not be set as Enabled.
Note: This feature may not be available depending on the model of your unit.
Copies the database files from the unit to a connected USB device.
Copies the database files from a connected USB device to the unit.
Copies app cache data from a connected USB device to the unit.
Note: This feature may not be available depending on the model of your unit.
Press OK to open the USB information menu screen. Current Total space and Free
space information of the connected USB device will be displayed. You can also format the
connected USB device using the Format Disk option in this menu (FAT32 format only).
Highlight and press OK to perform USB operations.
Set as Off to disable the USB ports on the Display. You can also set this option as 5V
to provide 5 volts power over USB. In this case it will still not be available to browse the
USB content via Media Browser feature of the Display.
Press OK to open the Video Wall Settings menu screen. Row Count, Column Count,
Cell, Offset, Enabled and Disabled options are available.
Press OK to open the Link Options menu screen. Current Start url and Settings url
links will be displayed. These items are for information only and not selectable. Open
browser initial page and NTP server link preferences can be configured using the
related options.
Press OK to see available menu options.
Highlight this option and press the OK button on the remote to return the Display to
default settings.
English - 13 -