Cec And Cec Rc Passthrough; Usage Of The Start Url - Kimex 163-4320 Manuel D'utilisation

function and press OK as much as needed. If the
symbol is marked with a red cross, that means it is
deactivated.
USB Auto Play Feature
USB AutoPlay feature is to start playing the media
content installed on a removable device, automatically.
It uses the Media Browser. The media content types
have different priorities in order to be played. The
reducing priority order is as Photo, Video and Audio.
That means, if there is Photo content in the root
directory of the removable device, Media Browser
will play the Photos in a sequence (in file name order)
instead of Video or Audio files. If not, it will be checked
for Video content and as last Audio.
This feature will only work if all of the following cir-
cumstances occur:
• The USB device is plugged in.
• USB Auto Play option is enabled. It is placed in the
Settings>System>More menu.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled
devices, that are connected through HDMI ports by
using the remote control of the Display.
The CEC option in the Settings>System>More menu
should be set as Enabled at first. Press the Source
button and select the HDMI input of the connected
CEC device from the Sources List menu. When
new CEC source device is connected, it will be listed
in source menu with its own name instead of the
connected HDMI ports name(such as DVD Player,
Recorder 1 etc.).
The Display remote is automatically able to perform
the main functions after the connected HDMI source
has been selected. To terminate this operation and
control the Display via the remote again, press and
hold the "0-Zero" button on the remote control for 3
seconds.
You can disable the CEC functionality by setting the
related option under the Settings>System>More
menu accordingly.
The Display supports ARC (Audio Return Channel).
This feature is an audio link meant to replace other
cables between the Display and an audio system (A/V
receiver or speaker system).
When ARC is active, the Display does not mute its
other audio outputs automatically. You will need to
decrease Display volume to zero manually if you
wish to hear the ARC audio only (same as optical or
co-axial digital audio outputs). If you want to change
connected device's volume level, you should select
that device from the source list. In that case volume
control keys are directed to connected audio device.
System Audio Control
Allows an Audio Amplifier/Receiver to be used with the
Display. The volume can be controlled using the remote
control of the Display. To activate this feature set the
Speakers option in the Settings>System>More
menu as Amplifier. The Display speakers will be
muted and the sound of the watched source will be
provided from the connected sound system.
Note: The audio device should support System Audio Control
feature and CEC option should be set as Enabled.

Usage of the Start URL

• Create a file named "starturl.txt" in the root directory
of any USB storage device. Make sure that the
extension is "txt".
• Open this file with a text editor software such as
Notepad.
• Write the desired URL (for example, www.starturl.
com) in the file and save changes.
• Connect the USB strorage device to the
Display. Highlight USB Operations option in the
Settings>Signage>USB menu and press OK.
• Switch the Display off and then switch it on again.
Note: You can check if the Start URL have the desired link
from the Settings>Signage>Link Options menu.
English - 10 -