Switching On/Off - Hama 60 Mode D'emploi

7. Operation
7.1. Connection to the vehicle's electrical system
Warning – rechargeable battery
• Only use suitable charging devices with USB connections for charging.
• As a rule, do not use charging devices or USB connections that are defective and do not try to
repair them yourself.
• Do not overcharge the product or allow the battery to completely discharge.
• Avoid storing, charging or using the device in extreme temperatures and extremely low
atmospheric pressure (for example, at high altitudes).
• When stored over a long period of time, batteries should be charged regularly (at least every
three months).
• Connect the included Mini-USB charging cable to the Mini-USB charging socket (5) on the Dashcam
and to the vehicle socket of the electrical system.
• The Dashcam automatically switches on when the engine is started.
Note - Battery capacity
The battery has a limited life of about 2–3 minutes. This buffer function is used for continuation of
the time, for example. Longer operation is possible only with a connected vehicle adapter.
Note - Constant battery operation
The device is not intended for constant battery operation. This can lead to irreparable damage.

7.2. Switching on/off

Note - Automatic switching on/off
If the Dashcam is connected to a power source by means of the vehicle charger, it automatically
switches on/off when the vehicle is started/switched off.
Note - Car battery
With some vehicles, it can happen that power continues to be supplied even though the ignition
has been switched off. In this case, switch off the camera manually to protect your car battery from
discharge.
Press and hold Power [ ] (6) for about 3 seconds to manually switch on/off the Dashcam.
7