Loop Function; Motion Detection - Hama 60 Mode D'emploi

9.1.1 Resolution
Select the desired resolution (1080P 1440X1080 / 720P 1280X720 / WVGA 848X480) of the
recorded video material.
• Navigate to the Resolution menu item and confirm your selection by pressing [OK] (11). A new
overview window opens.
• Use the navigation buttons [▼] (9) / [▲] (10) to select the desired setting.
• Confirm your selection by pressing [OK] (11).

9.1.2 Loop function

Select the time interval (1/2/3/5 minutes) after which a new video recording should begin.
Select Off to deactivate this function. Now only one file will be created.
• Navigate to the Loop functionmenu item and confirm your selection by pressing [OK] (11). A new
overview window opens.
• Use the navigation buttons [▼] (9) / [▲] (10) to select the desired setting.
• Confirm your selection by pressing [OK] (11).
• is shown on the video display.
9.1.3 Contrast
Improve the quality of the video recording through contrast adjustment (-2 to +2).
• Navigate to the Contrast menu item and confirm your selection by pressing [OK] (11). A new
overview window opens.
• Use the navigation buttons [▼] (9) / [▲] (10) to select the desired setting.
• Confirm your selection by pressing [OK] (11).
• is shown on the video display.

9.1.4 Motion detection

With motion detection activated, video recording is automatically started when the camera senses
vibrations (for example, in the case of an accident).
• Navigate to the Motion detectionmenu item and confirm your selection by pressing [OK] (11). A
new overview window opens.
• Use the navigation buttons [▼] (9) / [▲] (10) to select the desired setting.
• Confirm your selection by pressing [OK] (11).
• is shown on the video display.
9