Groups Of C Version / Dt Version Without Display; Filter-Holders - LaCimbali M26 Utilisation Et Installation

Groups of C version / DT version without display

1
Remove the filter holder
from the coffee group.
5
Attach the lter-holder to the
dispenser unit.
Do not remove the
lter holder during
coffee dispensing.

FILTER-HOLDERS -

1
In a suitable container that is
neither aluminium or iron, pour
a litre of hot water (122 17 °F
50÷80°C) and a quantity of
detergent according to the
product instructions.
4
Remove any residue with a sponge and rinse well with
running cold water.
2
Using a brush, clean the
cover gasket.
6
Press the START/STOP
button and press it again
after 10 seconds. Repeat
this step 10 times.
2
Remove the lters from the lter holders.
3
Insert the rubber disk into
the lter-holder with its lter.
7
Remove the lter holder Press the START/STOP button
and execute the rinse cycle with water for about 30".
5
A
Place the lters back in the lter holder, making sure that
the anchoring spring (A) of the lter is in its slot.
2 EN
4
P o u r i n a q u a n t i t y o f
detergent powder according
to the product instructions.
3
Soak the lters and the lter
holders in this solution for
about 15 minutes.
NOTE! Only immerse the
metal parts.