First Time Installation - TECHWOOD TDVD19TN10 Mode D'emploi

First Time Installation

IMPORTANT: Ensure that the aerial is connected
before switching on the TV for the first time
installation.
First, you will be asked to set and confi rm a PIN
number. Selected PIN number cannot be 0000. Enter
a PIN number and confi rm it by entering once more.
Press OK button to continue. If the two PIN numbers
match, your master PIN number will be set. Next,
language selection screen will be displayed:
• When the TV is operated for the fi rst time, installation
wizard will guide you through the process. Next,
language selection screen will be displayed:
• Use " " or " " buttons to select your language
and press OK button to set selected language and
continue.
• After selecting the language, "
be displayed, requiring you to set Country,Teletext
Language and Scan Encrypted options.
• By pressing " " or " " button, select the country
you want to set and press " " button to highlight
Teletext Language option. Use " " or " " button
to select desired Teletext Language.
• Press " " button after setting Teletext Language
option. Scan Encrypted will be then highlighted.
You can set Scan Encrypted as Yes if you want to
scan coded stations.Afterwards select the desired
Teletext Language.
• Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
Welcome!" screen will
English - 52 -
To select the "Yes" or "No" option, highlight the item by
using " " or " " buttons and press OK button.
Afterwards, the following OSD will be displayed on the
screen and the digital television will search for digital
terrestrial TV broadcasts
Note: You can press "MENU" button to cancel.
• After all the available stations are stored, Channel
List will be displayed on the screen. If you like the
sort channels, according to the LCN,please select
"Yes" and than press "OK".
• Press OK button to quit channel list and watch TV.