Steamfast SF-210 Mode D'emploi page 3

10. Do not use unit where aerosol-based products are being used, or where oxygen is being
administered.
11. Unit is only meant to be used with recommended Everyday Steam Cleaner (model SF-210)
accessories. Using other types of attachments may cause damage to unit or injury.
12. If Heating Indicator Light does not illuminate when unit is plugged in, unit is not operating
normally. Immediately disconnect cord from power supply, then refer to troubleshooting guide
on Page 12 of this manual for assistance.
13. Do not attempt to use unit without properly filling Boiler with water.
14. When filling unit, only water should be used – other cleaning agents could damage unit or
cause injury. Distilled or de-mineralized water is highly recommended, in order to minimize
potential build-up of mineral deposits.
15. To reduce risk of contact with hot water emitting from Steam Nozzle, check appliance before
each use by positioning it away from body and turning it on. Do not operate unit if Steam
Nozzle is blocked.
16. Burns can occur from touching hot plastic parts, hot water, or steam. Do not touch Steam
Nozzle or attempt to connect any accessories while unit is in use. Use caution when you turn
unit upside-down – there may be hot water inside.
17. When steaming any surface for the first time, it is recommended that you consult the
manufacturer's guidelines for the material being steamed. For items in question, test on an
inconspicuous area before proceeding.
18. Do not allow power cord to touch hot surfaces during use. Loosely bundle cord when storing.
19. Always allow Everyday Steam Cleaner to cool (at least 30 minutes for complete cooling) and
empty Boiler before storing.
SAVE THESE INSTRUCTIONS!
FOR HOUSEHOLD USE ONLY
Questions or comments?
•
www.steamfast.com
•
consumerservice@steamfast.com
•
1-800-711-6617
Speak your mind! We invite you to review this product online:
www.steamfast.com/reviews
ENGLISH | 3