Safety Information - Engel DROID TDT2 EN1020 Manuel D'utilisation

SAFETY INFORMATION

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RA IN OR
MOISTURE.
of the unit. Refer servicing to qualified service personnel.
The lightning flash with arrow head symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operation and servicing
instructions in the literature accompanying the appliance.
WA RNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIA NCE TO RA IN OR MOISTURE.
CA UTION: TO PREVENT ELECTRIC SHOCK, MA TCH WIDE BLA DE OF
PLUG TO WIDE SLOT A ND FULLY INSERT.
The apparatus shall not be exposed to dripping or splashing, and no
objects filled with liquids, such as vases, shall be placed on the apparatus.
IMPORTANT SAFEGUARDS
In addition to the careful attention devoted to quality standards
in the manufacturing of your set-top box, safety is a major factor
in the design of every instrument. However, safety is your
responsibility, too. This sheet lists important information that will
help assure your enjoyment and proper use of the set-top box
and its accessories. Please read them carefully before installing
and operating your set-top box.
Installation
1. Read and Follow Instructions- All the safety and operation instructions
should be read before the set-top box is operated. Follow all operating
instructions.
2. Retain Instructions- The safety and operating instructions should be
retained for future reference.
3. Heed all Warnings-Comply with all warnings on the set-top box and
operating instructions.
Power - This set-top box is supplied with a DC power. To prevent
4.
electric shock, ensure the adaptor is inserted correctly into
the power outlet.
5. Power Sources- This set-top box should only be operated with the
ratting specified on the label on the back panel of the set-top box.
If you are not sure of the type of power supply to your home or office,
please consult your set-top box dealer or electrician. For set-top boxes
intended to operate from battery power, or other sources, refer to the
operating instructions.
6. Overloading- Do not overload wall outlets or extension cords as this can
result in a risk of fire or electric shock. Overloaded AC outlets, extension
cords, frayed power cords, damaged or cracked wire insulation, and
broken plugs are dangerous, They may result in a shock or fire hazard.
Periodically examine the cord, and if its appearance indicate damage or
deteriorated insulation, have it replaced by your service technician.
7. Power-Cord Protection- Power-supply cords should be routed so that
they are not likely to be walked on or damaged by items placed upon or
against them, paying particular attention to the point where they exit
from the set-top box.
8. Ventilation- Slots and openings in the case are provided for ventilation
to ensure reliable operation of the set-top box and to protect it from
overheating. These openings must not be blocked or covered. The
openings should never be blocked by placing the set-top box on a
bed, sofa, rug, or heat register. This set-top box should not be placed in a
built-in installation such as a book case or rack, unless proper ventilation
is provided or the set-top box manufacturer's instructions have been
followed.
9. A ttachments- Do not use attachments unless recommended by the
set-top box manufacturer as they may cause hazards.
CAUTION
: To reduce the
r isk of fire and electric shock, do
n ot remove the cover (or back panel)
10. The apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids ,such as vases shall be placed on the apparatus.
Caution: Maintain electrical safety. Powerline operated equipment or accessories
connected to this unit should bear safety certification mark on the accessory itself
and should not be modified so as to compromise the safety features. This will help
avoid any potential hazard from electrical shock or fire. If in doubt, contact a
qualified service personnel.
11. A ccessories- Do not place this set-top box on an unstable cart, stand, tripod,
bracket, or table. The set-top box may fall, causing serious injury to a child or
adult as well as serious damage to the set-top box. Use this set-top box only
with a cart, stand, tripod, bracket, or table recommended by the manufacturer's
or sold with the set-top box. Any mounting of the product should follow the
manufacturer's instructions and use of a mounting accessory recommended by
the manufacturer.
11a. A set-top box and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause damage to the set-top box.
12. Outdoor Antenna Grounding- If an outside antenna or cable system is connected to
the set-top box, be sure the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static charges. Section 810 of
the National Electrical Code, ANSI/NFPA No.70-1984 (Section 54 of Canadian
Electrical Code, Part1) provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna-
discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.
13. Power Lines-A n outside antenna system should not be located in the vicinity of
overhead power lines, other electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching or approaching such power lines or
circuits, as contact with them might be fatal. Installing an outdoor antenna can be
hazardous and should be left to a professional antenna installer.
Use
14. Cleaning- Unplug the set-top box from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
15.
Objects that may touch dangerous voltage points or "short-out" parts could result in
a fire or electric shock. Never spill liquid of any kind on the set-top box.
16. Lightning-For added protection for this set-top box during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system. This will prevent damage to
the set-top box due to lightning and power line surges.
Service
17. Servicing-Do not attempt to service this set-top box yourself, as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
18. Conditions Requiring Service-Unplug the set-top box from the wall outlet and
refer servicing to qualified service personnel under the following conditions:
A . When the DC power adaptor or connecting power cord is damaged.
B. If liquid has been spilled, or objects have fallen into the set-top box.
C. If the set-top box has been exposed to rain or water.
D. If the video does not operate normally by following the operating
instructions.
A djust only those controls that are covered by operating instructions.
Improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the set-top box
to its normal operation.
E. I f the set-top box has been dropped or cabinet has been damaged.
F. W hen the set-top box exhibits a distinct change in performance-this
indicates a need for service.
19. Replacement Parts-When replacement parts are required, have the service
technician verify that the replacements he uses have the same safety characteristics
as the original parts. Use of replacements specified by the set-top box manufacturer
can prevent fire, electric shock, or other hazards.
20. Safety Check-Upon completion of any service or repairs to this set-top box, ask
the service technician to perform safety checks recommended by the manufacturer
to determine that the set-top box is in safe operating condition.
21. Wall or Ceiling Mounting- The product should be mounted to a wall or ceiling only
as recommended by the manufacturer.
22. Heat-The product should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce heat.
EN1020