automatic, sound activated, synchronized light show. This function is good when you
want an instant show. The first fixture it's DMX input cable will have nothing connect
it, and the other fixtures will be set in slave mode automatically. Their DMX input
cables connect the last fixture DMX output cable (daisy chain). Any fixture can act as
a Master or as a Slave
DMX Controller
The fixture can be set the DMX address remotely by universal DMX controller. First,
you need to programming two scenes into a chase, and then link the fixtures to the
universal DMX controller. When you run the chase, all the fixtures of the chain will be
set the series DMX address automatically. The fixture uses four channels. Please refer
to the following diagram to set the address for the first four units.
16 channels DMX protocol :
16CH
function
1
x-axis
2
X axis fine tuning
3
Y
-axis
4
Y-axis fine tuning
5
X Y axis velocity
6
Pattern white light
7
Pattern stroboscopic
8
colour plate
DMXvalue
0-255
0-255
0-255
0-255
0-255
Speed from fast to slow
0-255
Pattern dimming from dark to bright
0-10
No function
Synchronous stroboscopic speed
11-255
from slow to fast(1HZ~25HZ)
0-4
white light
5--12
Color 1
13-20
Color 2
21-28
Color 3
29-36
Color 4
describe
14