Teac LP-P1000 Mode D'emploi page 26

6 Press the CLOCK ADJUST button.
Display example
The minute value blinks.
7 Press the TIME (j/k) buttons to set
the current minute.
8
Press the CLOCK ADJUST button.
This completes the procedures for setting the time.
The clock will start from the set minute at 0 seconds.
o The unit's clock and wakeup timer settings will be
erased if a power outage occurs or the power cord is
unplugged from an outlet.
26
Setting the clock (2)
Current time display
The clock is always shown when the unit is in standby
mode (off ) and when the function is set to PHONO/
AUX.
Press the remote control's DISPLAY button to show the
clock on the display.
o The current time is shown for three seconds in CD
and FM/AM modes.
Display example
o The DISPLAY button does not function in AUX/
PHONO and Bluetooth modes.
o In Bluetooth mode, the current time is only shown
when paired.
Current time