Brother P-Touch 9500PC Guide De Référence Rapide page 39

Select the "Start up the Change Baud
9
Rate Wizard" check box, and then click
[Next].
→ The Change Baud Rate Wizard
(Brother PT-9500PC) dialog box
appears.
Select the appropriate Serial Port, and
0
then click [Next].
→ A dialog box to select the desired
baud rate appears.
38
Select the desired baud rate, and then
a
click [Next].
Select 115,200 bps for the serial port
baud rate using a personal computer that
supports a baud rate of 115,200 bps. If the
personal computer does not support a
serial port baud rate of 115,200 bps,
select the appropriate baud rate.
→ A dialog box to confirm the baud
rate settings appears.
Click [Next].
b
→ The baud rate will be set.
• When the baud rate settings are
complete, the PT-9500PC and personal
computer can communicate using the
serial port.
→ The dialog box to indicate
installation is complete appears.
Remove the CD-ROM from the CD-ROM
c
drive.