Connecting To The Power Source - Brother P-Touch 9500PC Guide De Référence Rapide

Connecting the PT-9500PC
Connect the PT-9500PC to the power source and a personal computer.
Connecting to the power
source
Connect the included power supply cord
1
to the AC adapter.
Insert the AC adapter connector into the
2
AC adapter jack/socket on the back of
the PT-9500PC.
Plug the power supply cord into an
3
electrical outlet (AC 120 V).
Note
●
After using the PT-9500PC, remove the
power supply cord from the electrical
outlet and the AC adapter from the
PT-9500PC and store for future use.
●
When removing the AC adapter, do not
pull the AC adapter cord. The wire in the
AC adapter cord may break.
●
Do not use any AC adapter other than the
one included with the PT-9500PC. The
PT-9500PC may malfunction.
15