Accessories
en
_Accessories
B elow, you will find an overview of the accessories
A c c e s s o r i e s
included and information on how to use them correctly.
Caution!
When removing dishes, make sure that the turntable
does not move. Make sure that the turntable is properly
locked. The turntable can turn left or right.
Special accessories
Special accessories can be purchased from our after-
sales service, from specialist retailers, or online. You
will find a comprehensive range of products in our
brochures and online.
Their availability and whether it is possible to order
them online varies from country to country. Please see
our sales brochures for more details.
Note: Not all special accessories are suitable for every
appliance. When purchasing, please always quote the
exact identification number (E-no.) of your appliance.
~ "Customer service" on page 33
Steaming utensils
For cooking rice, potatoes and vegetables
26
Turntable
Note: Never use the appliance
without the turntable.Make sure
that it is properly engaged. The
turntable can turn clockwise or
anti-clockwise.
Roller ring
KBefore using for the first
time
T his section tells you what you need to do before using
B e f o r e u s i n g f o r t h e f i r s t t i m e
your microwave to prepare food for the first time. Read
the section entitled "Safety information" beforehand.
~ "Important safety information" on page 21
Before you can use your new appliance, you will need
to put the turntable in place correctly. You must also
clean the cooking compartment and accessories.
Cleaning the cooking compartment and
putting the turntable in place
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
How to put the turntable in place
Place the roller ring a into the recess in the cooking
1.
compartment.
Make sure that the turntable b engages in the drive c
2.
in the centre of the cooking compartment floor.
Note: Never use the appliance without the turntable.
Make sure that it is properly engaged.The turntable can
turn clockwise or anti-clockwise.
Initial use
After connecting the appliance to the mains, or
following a power failure, a signal sounds and four
zeros appear in the display.
Setting the time
The prompt to set the time may last a number of
seconds.
A signal will sound,
‚ƒ
the colon will flash and the indicator lamp above the
time field will light up.
Use the settings area to set the time.
1.
Touch the
field.
|
2.
The time has now been set.
Hiding the clock
In order to reduce the energy consumption of your
appliance in standby, you can hide the clock.
Touch the
field.
|
1.
Touch the
/
field.
a
s
2.
The display is blank.
:
will appear in the display,
‹‹