TRENDnet TPL-302E Guide D'installation Rapide page 13

14. Click Network ID.
Note: The default network name is TRENDnet. If the network ID of your
existing Powerline network is NOT TRENDnet, you must change this in the
utility.
15. If you would like to change the
Network ID, enter the desired ID.
Then enter the 12 digit DAK
(device) Password for the
Remote TPL-302E (see step 8).
Note: The DAK (device)
Password is case sensitive. You
must enter the DAK (device)
password with the dashes. For
example: XXXX-XXXX-XXXX-
XXXX. Then click Save Changes.
Wait 30 seconds while changes
are being saved.
16. If Device Selection does not
automatically switch to Local,
select Local from the dropdown
list.
Note: Local refers to the TPL-302E that is connected to an Ethernet
connection on your network or an available LAN port on your router.
11
English