Troubleshooting Guide - Altrad BELLE PCEL 400E Manuel De L'opérateur

Problem
Motor fails to start.
Motor runs but dies down.
Motor takes too long to
accelerate.
Motor overload protector
continually trips.
The motor makes a loud
rubbing or grinding noise.
Unit will not vibrate.
Asphalt adhering to plate.
(laminating).
Low travel speed (plate
sinking).

Troubleshooting Guide

Cause
have failed.
Problem
contact power company or check if some other
Belle.
company or check if some other equipment is
as the old motor. If previous motor was a special
and check motor doesn't trip.
19
GB
or
.