Preparation For Use; Mattress Installation - arjo TheraRest Série Mode D'emploi

EN

Preparation for Use

1. Open shipping container.
CAUTION
Do not use sharp instruments to open boxes. Damage to
mattress could result.
NOTE
For the TheraRest SMS Perimeter Plus VE models; if stored
below room temperature make sure mattress is at room
temperature before proceeding to the next step.
NOTE
The mattress cover may appear wrinkled when unpacked. To
remove wrinkles, allow mattress up to 24 hours to accommodate;
see Troubleshooting for more information. Wrinkles will not
needed.
2. Remove the mattress from the plastic protective cover.
3. Check the mattress surface for tears or cracking; do not use if tears or
cracks are present.
4. If re-installing mattress onto a new frame or for a new patient, check
mattress surface for staining and soiling; clean and / or disinfect as
required (see Care and Cleaning).
5. Level bed and lock brakes
6. Remove the existing mattress from the bed frame, if applicable.

Mattress Installation

1. Position the mattress on the bed frame with the logo facing up and
product information tags at the foot end of the bed.
2. Ensure there are no gaps between the mattress and the bed frame or
the side rails.
8