Inspection - arjo TheraRest Série Mode D'emploi

CAUTION
Always use a standard healthcare bed frame with safeguards or
protocols that may be appropriate. Frame and side rails must be
properly sized relative to the mattress to help minimize any gaps
that might entrap a patient's head or body.

Inspection

• Check the product surface for staining and soiling, clean and / or
disinfect as required.
•
tears or cracks are present.
• If the mattress cover was recently replaced, ensure that the foam
is installed correctly in the new cover, with the top of the foam (i.e.,
contoured surface or 6.4 cm (2.5 inches) topper foam) towards the
purple top cover and the sloped foam surface toward the foot end.
EN
9