Measurement Start; Automatic Start; Manual Start; Alarm Visualisation - JRI Maxant Spy RF TH 06247D Notice D'utilisation

e)

Measurement start

The SPY RF has 2 starting mode:

automatic start



manual start


f) Automatic start
Your SPY RF starts recording:
automatically when the configuration is transferred,

It displays the temperature in °C degrees, channel number, measurement unit and memory status.
The green LED flashes every minute.
The temperature, threshold indicator, channel number and a red LED flashes every 15 sec in case the
threshold limit is overpassed.
at a programmed date and time:

dd / mm / yy
hh / mm / ss
g) Manual start
Press shortly on the pushbutton

It displays the temperature in °C degrees, channel number, measurement unit and memory status.
The green LED flashes every minute.
h)

Alarm visualisation

The SPY RF is equipped with different alarm indicators, when a threshold limit is overpassed.
Pre alarm

Working LED (green):
2'' => starting measurements
+
then flashes every 1 minute
+
+
15
Working LED (green):
2'' => starting measurements
then flashes every 1 minute
Working LED (green):
2'' => starting measurements
then flashes every 1 minute