Installation Of Wall-Mounting Bracket; Use; Stop; Start - JRI Maxant Spy RF TH 06247D Notice D'utilisation

b)

Installation of wall-mounting bracket

The bracket can be fixed thanks to its adhesive plaster or it can be screwed.
Screwing map
V. USE
a)

Stop

When you receive it, your SPY RF is stopped. Only the time clock is active. It can neither emit nor receive anything.
b)

Start

c)

Waiting mode

The SPY RF is ready to receive a configuration or to start a new recording session.
The symbol "Halt" is on: no measures in progress.
Use the pushbutton to start.
d)

Configuration

To start your SPY RF, please press between 5 and 10"
on the button:
- the 2 LEDs are on and flash at the same time
- all the display segments are also on
- SPY RF is now in waiting mode
Remark: If you press >10'' => no effect => remains off
SPY RF configuration is done from the Sirius software and then
transferred into your SPY RF by radio frequency.
14
Possibility to install a
lock against robbery